clogged drain pipe

Tips And Hints On Getting Rid Of A Clogged Drain

Well, you’ve decided to perfect the plumbing of your house. Good for you! However, there is so much information that you may not know where to begin. Don’t worry, plumbing tips are here! Listed below are some tips that will help you get started and organized, so that you can become a plumbing expert.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Set of plumbing tools on wooden table background. Close up top down view with copy space.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.

Never pour grease or anything fatty or oily into your drain. Whenever they cool, they tend to harden and make clogs inside your drains. If the sink has a garbage disposal, it will also make the blades less efficient. Don’t put oils down the sink.

It is important to run your faucet with cold water whenever you run your garbage disposal. The blades on the unit will remain sharper and disposal will proceed with few glitches. If you use hot water, any grease in the disposal will turn into liquid, while causes pipe clogging.

Installing efficient shower heads could save you a lot of money when it comes to your energy bill. Most hot water is consumed in our showers. When you install an energy-efficient shower head, you will reduce your home’s water consumption, which means money left in your pocket.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

You should feel better after reading those tips when it comes to plumbing. That was a lot to read through, but at least you should have an idea of what to do and where to begin with your home’s plumbing. Besides, you can always come back to this list if you need to.